Steel, seen at Interbike '07

This Ritchey Breakaway singlespeed/fixed gear frame is a new model for 2008.
Geometry is similar to the Breakaway road frame but with a higher bottom bracket for fixed gear pedal clearance.
I think there will be one of these in my fleet before too long.

Something similar from Kirk Pacenti. This was used as a showcase for Cane Creek's range of fixed gear wheels.
A demountable fixie could be the ideal non-touring travel bike, but these deep section carbon wheels might not be ideal for urban pothole dodging.

Rawlands Cycles 650b bikes with Pacenti's new fork crown, and (right) the Pacenti 650b aka 27.5" Neo Moto MTB tyre.

Makino road fixed gear on the Euro-Asia stand.

Eura-Asia always has some high-end Japanese steel goodness on display.
They also had some new leather saddles from Gilles Berthoud.




The Tom Ritchey designed Coffee Bike for Project Rwanda. You can see it in action in this video.




This Pegoretti Luigino was on the Brooks stand. I have never seen a Luigino with these Prugnat lugs before.











For 2008 Brooks is introducing a messenger bag, plus a more affordable, steel railed version of my favourite saddle, the Swallow.

This stunning town bike from Northern Californian geniuses Sycip was on the Shimano stand promoting their Alfine group.

Rigi bicycle stolen from Invercargill $500 reward offered.

Some bad news from Wayne Davidson in Invercargill:

"My much loved Rigi has been stolen from Invercargill NZ on the 29/30September 2007. Sometime between 5pm and 5am my car was broken into and the bicycle was stolen. "

If you have any information, email Wayne, or phone him, at home

03 2172918 or mobile 027 3695222

RIGI SS 57cm road bicycle.

FRAME - 57cm SS painted white.

HEADSET - Campagnolo SR.

SEATPOST - Campagnolo NR with SR Black anno side supports & OMAS black alloynut/bolt. BINDER BOLT - OMAS black alloy.

SEAT - Concor black seude.

STEM - 3ttt silver 120mm 2002.

BARS - 3ttt

BRAKES - Modolo Masterpro ti black with sintered shoes.

BOTTOM BRACKET - O.M.A.S Ti. Alloy lockrings.

CRANKSET - Galli 52x42 with OMAS alloy chainring bolts.

PEDALS - Galli SC Road.

TOECLIPS - Black alloy Galli.

STRAPS - Alfredo Binda Super EXTRA.

REAR DERAILEUR - Campagnolo SR.

CLUSTER - Everest alloy 6 speed 13-21.

CHAIN - Regina America Superleggera.

HUBS - O.M.A.S Ti small flange - 36H.

RIMS - Nisi Stretto Corsa tubular - 36.

SPOKES - SS Semi Aero, radial front and x3 rear.

DRINKBOTTLE - ALE blue.

DRINKBOTTLE CAGE - Ale black alloy.

Velo Rendezvous 7

Though I went to Interbike in Las Vegas, I could not make it to Velo Rendezvous in Pasadena last weekend.
Fortunately, some highlights are already on YouTube:
For those of you whose corporate servers won't permit YouTube, here are photos from Christine O'Callahan and Tam Pham.
Tam has also posted a video that might slide through some corporate moral filters.

Delving into Flickr

For years I have stored photos on a couple Yahoo albums, but recently Yahoo have migrated all my photos over to Flickr, which turns out to be no bad thing. While Yahoo albums were discrete entities, Flickr is more of an interconnected community. Users can 'pool' photos into groups, like the Steel Bike Gallery, the 650b Bicycles pool, or the Classic Lightweight Bicycles pool. And one for Dan Rosser, the Mercian owners pool.

Flickr is also searcheable. After only a few minutes of rainy day delving, I present a cornucopia of links for your websurfing pleasure:

A stunning 1979 W.B. Hurlow racing frame
Bob Freitas' Hurlow seen at the 2007 Marin Century
A series of photos showing legendary English framebuilder Ron Cooper at work.
For baggage fetishists, there's the Carradice Club
The Bicycle Head Badge pool

Monte Paschi Eroica Pro race

From Cycling News last Tuesday:

"Le strade bianche of Siena that have become popular amongst cycling enthusiasts will now play host to the top pros. The Monte Paschi Eroica, presented yesterday in Milano by RCS Sport, will be the first time for professionals to race over the white gravel roads. The 180 kilometre race it is held on October 9.
The race, starting in Gaiole in Chianti and ending in Siena, will include seven sectors, 70 kilometres of 'sterrati' ('gravel roads') inspired by races like Paris-Roubaix and the Ronde van Vlaanderen."

The full article, with a map and course profile, is here.

The race will finish in Sienna's town square, more famous as the venue of the crazy Il Palio horse race. The organisers must be betting that there will be no bunch finish, because the cobbled streets of Sienna are too narrow and winding for a peleton at full speed.

CBAD

That's Compulsive Bicycle Acquisition Disorder, and I've got it.
So has Matt Seaton who wrote in 'Two Wheels' of an addiction that requires 'a degree of subterfuge in hiding one's compulsive bike acquisition habit from one's family that only alcoholics and serial adulterers would recognise.'

I'm lucky that my Spousal Unit prefers an ever increasing inventory of old bikes to finding whiskey bottles or teenage mistresses in the wardrobe, but some CBAD sufferers are not so lucky. On occasion I have provided discreet storage and other laundering facilities to friends who have added to their collections without spousal sanction.

Yesterday I was uncharacteristically restrained, deciding not to bid on this 1972 Frejus frame, although I have wanted one ever since I sold my first one in 1979. I don't think this indicates that I am getting my problem under control- there were too many potential logistical hurdles extracting it from the United States.

More on Mr Gami's Toei

It looks like I posted only a few hours before Mr Gami updated his website regarding his new Toei Sportif- steel frame from Kaisei 8630 tubing, a carbon-free Campagnolo Centaur drivetrain, mudguards over fast clincher tyres, even an alternative steel fork with a rack to support a handlebar bag.
It's spookily close to my dream road bike, though I would not last long on that razor blade of a saddle.

Tantalising Toei

Sifting through Mr Gami's website, I find this photo of a modern Toei Sportif bike with a caption which Babelfish renders as:
'スポルティーフ which order has been done almost got near to completion. The fact that it goes to receiving is the pleasure.'
Some more Babelisms about the bike here.

Leather fetish

This week I had a small ebay splurge, stocking up on TA bottom brackets & crankarms, but the item I really wanted eluded me. Despite already owning 4 Ideale leather saddles, I'm still hankering for a cutaway, aluminium rail Model 90, but lack the financial recklessness necessary to acquire one.
This beauty sold for US$311.69, which is nothing like top dollar- in 2005 this Ideale Model 57 went for US$2175, according to the Classic Rendezvous Market Highs page.

The buyer, ebayer tdan4th, must have the world's largest collection of Brooks and Ideale saddles. Check out his ebay feedback- 21 saddles since 14th June, which makes my recent acquisition of only two non-cutaway Model 90s seem almost rational.

Polishing

Despite fine weather and a shed full of functional bicycles, I mostly stayed indoors last weekend. I had plans of building up some wheels for CT-B's Holdsworth, but a glitch in my spoke calculator spreadsheet put paid to that. Fortunately Rick Woodward's OSH non-compliant polisher was more reliable, and I got a nice shine on the Fiamme Sport 71 rims and Campagnolo Nuovo Tipo hubs without losing any fingers.

Experiments with Evapo-Rust

Rust may be the biggest problem when you are trying to preserve an old bike in original but patina'd condition. Most rust removers are acidic, and incompatible with old paint and chrome, not to mention skin. Evapo-Rust removes rust by selective chelation, without damaging surrounding paint or plating, and is non-toxic.
My first experiments were with rusty chrome plated parts- a set of Zeus Competicion chain wheel fixing bolts, and a Cinelli steel track stem. I soaked the parts in Evapo-Rust for 24 hours. As you can see, it did not miraculously restore the chrome, but it has left the surface free of rust. The black residue is carbon and will wipe or wirebrush off.
To prevent re-rusting, all you need to do is wipe the surface with Evapo-Rust after it has been rinsed off.

















My next experiment is to remove the rust from the chainstay's of CTB's Holdsworth, by wrapping Evapo-Rust soaked rags around the stays, and covering them with Glad Wrap to prevent evaporation. I'll post the 'after' photos later this weekend.

Drillium

From 'Bike World' December 1973.

Letterbox full of goodness

Today the postie brought the latest William Gibson, a good secondhand pair of Bicycle Fixation knickers, and an SR Royal Extra Super Light stem.
Most of SR's output was functional but uninspiring melt-forged crap, but, pre Yen Shock, their top of the line products were something else. Cold-forged, drilled, milled, slotted, and hollowed out, SR's Royal line mimicked the fashionable customised 'Drillium' components , but with the benefits of a factory warranty. They also supplied crankarm forgings to MAVIC and OMAS.
I already have earlier model fluted SR Royal SL stem and a matching seatpost on my Echelon Spectra. The hollow stem is destined for my putative Rory O'Brien frame, with some early Superbe Pro deraillers & hubs, Sugino Super Mighty cranks & seatpost and Dia-Compe brakes.

Catalog picture from Mr Gami's catalog scans page

A shopping trip

Last Saturday I went forth on my demountable, with BoB trailer attached, to pick up a Legnano frame from Tony at Cycle City. On the way I stopped at Bunnings, and got me a big manly Swedish axe and a gallon of Evapo-Rust (of which more later).

While I was rooting about at Cycle City I found a pair of 28h Fiamme Red label tubulars laced to Campagnolo Record wide flange hubs. The wheels themselves are pretty cool, but I had to have them for the Hills Cycle Works wheelcovers.

Retro Ride Report 12/8/07

You might think that Retroriders would stay abed on rainy mornings, but you would be mistaken.
Despite worse weather than the last Okoroire Ride, we had 6 starters on Sunday.
Mark Skelly, Dan Rosser, Peter Alexander, celebrity economist Chris Tennent-Brown, Donna and I managed a short lap of Mangere before retiring to the loungeroom for more coffee.
Dan showed exceptionally good form in debuting his brand new Mercian 753.

The Baylis Cycles website

More photos of Brian Baylis' work work from Carlos Martell.
Two galleries, one showing the painting process on a Baylis custom frame, the other showing the customisation of a Pacenti lugset.

More dodgy retro fashion.

After a decent interval of procrastination, I fitted some press studs to a pair of cutdown NZo 307 Lites, thereby converting them into a decent pair of cycling plus-twos. I have been commuting in them for a couple of weeks, worn over a pair of NZo Cruiseliners.
While you can get knickers in hemp, or wool gabardine, or fancy Swiss nano-fabric, the cutdown 307s are hard to beat for cost, ease of laundering and Nzo's legendary crashworthiness.
The only downside is that NZo doesn't acually make these themselves. If you think you would like a pair, or better a pair of knee length Dobies, feel free to deluge NZo with emails.

The Campagnolo Clothes Hanger

It turns out that the Campagnolo corkscrew was not the first application of Tullio Campagnolo's genius to domestic matters.
On the CR list yesterday, Dale Brown outed these patents for fancy clothes hangers, designed to prevent clothes being creased while they hang.

The Adventures of Sir Maldoror

Carlos Martell (right) , aka Sir Maldoror is Brian Baylis' (left) protege at the new San Diego-based framebuilders & painters cooperative .

Lately Carlos has been putting some of their framebuilding and restoration work online at maldororbicycles.com.

Without giving away too many of Baylis' hard-earned professional secrets, Sir Maldoror shows some of the processes involved in restoring vintage bikes after after a lifetime of hard use.

Some of these jobs, like paintstripping by hand are just nasty, while others, such as masking lugs, require incredible attention to detail in what seems like a mundane task.

More links to Baylis' work:
Large Fella on a Bike Framebuilders questionaire

Sheldon Brown's Baylis-restored Raleigh Professional

Baylis gallery at the Pacenti Cycle Design site.

Photo of Brian and Carlos by Matt Gorski, from WoolJersey

Okoroire Mid-Winter Fun Ride 2007

Due to truly Biblical weather, a number of people stayed abed yesterday and missed the Okoroire Fun Ride.

I was not one of them.

Arising at 5:45 to the sound of torrential rain, I breakfasted, packed my bag and awaited the arrival of Richard Oddy with the Pedaltours van. Collecting Richard's son-in-law Ivan from Ngaruawahia, we headed for Okoroire, where it was merely drizzling, in good time. By the 10am start, it was raining steadily, and as the day went on, the wind and rain increased steadily .

Usually I ride the fixie at Okoroire, but this time I rode the Hurlow. With my present lack of fitness and the strong wind, I made frequent of the 12 gears as I shamelessly wheelsucked my way to the finish. This strategy got me to the last couple of kms, but a strong effort up the last rise (and past the official photographer) finished me off, and I crawled to the finish.

RESULTS 'alla Francaise'

I could not have said it better myself...

BRUTUS appears to be a lifestyle magazine for stylish young Japanese persons.

This issue looks like it has plenty of meat for the Kanji-literate cycling enthusiast, though the back issues on offer indicate that it usually concerns itself with mundanity like cars, clothes & coffee.

MapMyRun

This is meant to show a map of the Retro Ride route, generated by Map My Run, a cunning web based device that seems to piggyback on Google Earth.
Unfortunately the embed code generated by their site does not work, but regardless, it's a very cool thing for mapping out routes.









In the absence of a functional embed code, here's the link .
Use the Map Settings to the left to turn off the annoying Distance Markers.
'Display Elevation' produces a course profile, while 'Map Type' allows you to switch from a street map to various Googloid satellite views.

Chris Money's new steel bike

On Saturday afternoon, we swapped Money's late 20th Century Avanti Kona frame for this fine Salsa Casseroll.

Needless to say, these jobs are never straightforward.
The Shimano BB was frozen into the Avanti frame, so I stripped the Campagnolo AC-H cartridge and Suntour Superbe Pro cranks off my neglected windtrainer bike.

The Casseroll frame makes a great all-round road bike.
It has a full set of rack and mudguard eyelets, and clearance for 32mm tyres with mudguards, or 35mm without.
Long, stainless steel, horizontal dropouts allow easy conversion to single speed or fixedgear.

Sizing is, maybe, a bit weird.
A 55cm Casseroll fits almost identically to my 60cm Ritchey Breakaway.
The frames are large for their nominal size, and I would recommend paying attention to top tube and head tube lengths when ordering.

Mafac Top 63 brakes

A few years ago Jonty Ritchie gave me two sets of old Mafac brakes that he had no use for.

The set of pimpy gold Mafac Competitions found their way onto a Witcomb I owned for a while, but these Top 63s stayed in their plastic bag until I saw a set go for ₤273 on ebay.
Not that I will be cashing in- they will go on the Hurlow when I have found a few small parts that are missing.

Top 63s were the most expensive centre pull available in their day.
According to Mick Butler:

'Regarding the 1969 prices of the various makes of centre pull brakes in that year. Balila Q.R. 49/6. Universal Q.R. 55/-. Mafac Racer 55/-. G.B. Coureur 66 60/-. & Mafac Top "63" at a whopping 75/-. '

This works out at a little over ₤6, pretty cheap compared to the 27 guineas (1 guinea =₤1-1s) that Richard Oddy paid for the then-new Campagnolo Record sidepulls in the same year.


Image above from Classic Rendezvous

Frenzy of bike acquisitions continues unabated...

except that this time it is Donna's turn.
This Bob Jackson touring frame is brand new. Imported by Sheppards in the mid-80s, it languished in a Christchurch bikeshop until it appeared on Trademe a couple of weeks ago.
Everything that I needed to build it into a civilised road fixie, except cables and bar tape, was lying about in the shed.

This is very much a work in progress.
The Superbe Pro seatpost may yet be swapped for a Campag 2-bolt post to get a little more seat setback, the rims don't match, and the mudguards are clapped out from my previous misuse.

Mo'fotos

Spec:
Gearing________________42 x 17
Bottom bracket__________Campagnolo AC-H
Crankset_______________SR Royal track 165mm
Brakes_________________MAFAC Racer
Brake levers____________Dia-Compe AGC251 Compact
Saddle_________________Brooks Swallow, by Tony Colegrave
Seatpost_______________Suntour Superbe Pro
Stem__________________TTT 9cm
Handlebars_____________TTT Competizione
Pedals_________________Campagnolo Superleggera

Okoroire Mid-Winter Fun Ride, July 29

The Okoroire Winter Fun Ride is on July 29th.
Details and a downloadable entry form are at http://www.tokoroalions.com/FunRide.htm
Usually there is a small but congenial Retro Grupetto. A report on last year's ride here.
If you are planning to join us this year, email me so that we can arrange to rendezvous before the start.

Retroride NZ discussion group

I have set up a Yahoo group called RetrorideNZ, with the intention of creating a New Zealand-wide online community of vintage lightweight bicycle enthusiasts.
If you would like to join, login at http://au.groups.yahoo.com/group/RetrorideNZ/ or if this does not work, email me and I'll send you an invitation.

Wild Bill Hurlow rides again

Saturday was devoted to final parts acquisition and assembly of my W.B.Hurlow.

Tony Mahon very kindly gave me a Zeus Criterium derailler & shiftlevers and a pair of Zeus track pedals; and to complete the gear train a Zeus front derailler arrived in Saturday's mail.
Most of the other parts came from my collection of junque- T.A. Cyclotouriste cranks, Mafac Racer brakeset, aluminium railed Ideale model 90 saddle, Fiamme stem and 44cm Ambrosio handlebars.

By bedtime, all I needed was to attach a bottle cage, and strap on a spare tubular.

I haven't achieved my goal of no-Campagnolo- my trusty pair of Campag Record-hubbed tubulars were pressed into service until I get time to build some Mavic MA2s onto a pair of Zeus Gigante hubs.

MORE PHOTOS at the Wool Jersey Gallery

Spec:
Headset________________Tange
Bottom bracket__________T.A
Crankset_______________T.A. Cyclotouriste 175mm, 38/47
Brakes_________________MAFAC Racer
Brake levers____________MAFAC Course 218 ?
Shift levers_____________Zeus Criterium
Front derailler___________Zeus
Rear derailler___________Zeus Criterium
Hubs__________________
Rims__________________
Freewheel______________Suntour Winner Ultra 6
Saddle_________________Ideale Mod.90, light alloy frame
Seatpost_______________
Stem__________________Fiamme 12cm
Handlebars_____________Ambrosio 13 Volte Campione del Mondo
Pedals_________________Zeus Pista, Christophe clips, ALE straps

Thanks to Robert S Broderick and Brad Stockwell for posting the Zeus, Ideale, T.A. and other catalogs that I have linked to.

60cm Rory O'Brien frame seeks new home

The arrival of the Hurlow means that something has to go, and the Rory O'Brien frame drew the short straw.
It's on on Trademe until next Tuesday at 4:25pm. Reserve is $50.
From the TradeMe auction:

"A frame with some interesting features- fastback seatstays with an unusual seat collar, Campagnolo vertical rear dropouts and round track fork blades.
Requires long reach (47-57mm) brakes.
Brazed-on top tube cable guides, bidon bosses, downtube lever bosses, seatstay cable stop and cable guides under bottom bracket.
Sold to me as a Rory OBrien, but I have no evidence to support or disprove this.

Seat tube: 60cm centre-top
Top tube: 57cm top tube
Wheelbase 100cm
Ritchey Logic headset fitted"

According to CR-list contributor Mick Butler, Rory O'Brien was a 'famous East London cycle shop owner ' who had frames built by Ephgrave. I would guess that this was built by someone else, well after Les Ephgraves' death in 1969.

PHOTOS on WoolJersey.

More Hurlows- updated

In the absence of my Hurlow frame, apparently scheduled to arrive early July, I googled up a couple of others:

This super-spanky 1969 Hurlow is featured at the V-CC New England Section blog.

Over at Fixed Gear Gallery, the lugwork on Adam Schwarcz' Stan Miles track bike is unmistakeably by Hurlow.

Some more Hurlow factoids and a couple more examples of his work at Hetchins.org.

Over at Bike Works NYC's bikecult site, a Hurlow-built 1962 Condor Italia, and a 1968 Condor with Hurlow's Superbe lugs.

Gaz' Bike

This is Gaz' road bike, newly fitted with Gran Bois Cypres 700 x 30 tyres to enhance it's already-sumptuous comfort.

It used to be blue, until a few scratches convinced Gaz that it needed to return for a second helping of Walter Thorburn magic.

According to Gaz:
"It is the best bike I have ever had, and the one I would take to a desert island as long as there were at least smooth paths."

Some wanteds

So that I can build the Hurlow Campagnolo-free:

Zeus straight lever rear skewer, pref for 6-7 speed

Zeus front hub, large flange, 36h

and/or

Zeus rear hub, large flange, 40h

Call me on 021 294 288, or EMAIL.

1948 Paris-Brest-Paris video

From the days when the 1200km Paris-Brest-Paris was still a race for professionals.

Now with extra Gillott!

Not that I need another bike, even a Gillott, but I have just added this lugless model to the stable.
The photos are straight from the TradeMe auction.
The frame is 57.5cm x 59cm, with Agrati dropouts.

Holdsworth Italia

Tom Bricklebank gave me this frame in 2004, and being too small for me, after a couple of months it found its way into Rick Woodward's garage.
With Rick's imminent emigration to the South Island, it is now in the possession of Chris Tennent-Brown.

I sent some photos to Holdsworth expert Norman Kilgariff, whose Holdsworth website is an invaluable resource. Norman identified the frame as a 'special', built by Reg Collard.

More photos of the frame at Wool Jersey.

Norman's letter is reproduced in edited form below:

Holdsworth Italia 28259

I believe this is a mid-late 1963, possibly early 1964 Italia, built by the great Reg Collard in the shop at 132 Lower Richmond Road, Putney, London.

Background:

Holdsworth, strictly the Holdsworthy Co Ltd (factory and wholesale side) brought out the first Italia in 1955. This short-lived model was fillet brazed and took over from the La Quelda.

Early in 1957, with the Suez crisis, petrol rationing etc under way there was a bust up at the factory and various folk left, including their “Special Builds” man Reg Collard.
Roy Thame said that Holdsworthy had progressed to a stage where they had a fixed range of frames and were no longer prepared to build to special requirements.
The W.F Holdsworth shops were still being asked for Specials, so Roy Thame approached Reg Collard in 1958, to set up a custom build facility at 132 Lower Richmond Rd .

------------------- Quote from Reg Collard Nov 2002 -----------------------------

1957: I joined Jensen Cycles Croydon immediately after leaving Holdsworthy. They were owned by Stan Etherington and John ?? Can’t remember his name. Stan had been a good track rider of the Herne Hill school. Hence we mainly built track frames plus a few road bikes as at this time the Crystal Palace circuit races were held weekly.

John had previously worked in the aircraft industry and had learned a technique of low temperature brazing using boracic acid powder and low temperature brass. Excessive heat could weaken frames, in addition using borax meant frames did not require sandblasting before filing.

1958 I joined Roy Thame at W.F.Holdsworth to build custom frames at 132 Lower Richmond Rd.
When Roy Thame approached me to set up a custom build workshop at 132, I jumped at the opportunity. We had to get all the jigs etc. built by a local toolmaker. Together with these and oxyacetylene and oxygen cylinders we were in business. We already had a long list of orders.

Soon after the first frame was completed we had a visit from Sandy and Mrs Holdsworth. Great excitement! Orders came flooding and very soon there was around three months waiting list for a new frame.

I was building mainly road frames plus track frames, which doubled up as time trial bikes, most people raced T.Ts. on fixed wheel until the mid sixties. In addition we produced a limited number of touring frames with brazed on fittings for custom-built carriers and various other accessories.

Frame Design. When I first started building most frames had angles of 71 or 72 degrees 73 was thought to be steep, fork rakes was around an inch and three quarters, with long rear seat stays. In conjunction with the Hemel Hempstead Cycling Club and one or two top time trialists we started to experiment with road designs that were more like track frames.

We ended up with 74/73 for T.Ts. and 73 parallel for road. Usually square design i.e. seat and top tube were the same length. Forks were around an inch and a quarter, seat stays in proportion.

Lugs and Forks We modified Cinelli fork crowns and Prugnat lugs by adding reinforcements approx. two inches long; this also stiffened the frame particularly at the bottom bracket.

Seat Cluster: The wrap over seat stays were not solid, I devised a way of cutting the stays to the correct angle on a specially made jig and then brazing on plate before filing to finish ready to fit to the frame. These were then bent under heat over the seat lug and filed to look like a solid fitting. This saved around twelve ounces. It was not long before others were copying this. The allen key seat bolt came at the same time.

Brazed On Bits: I designed various custom made brazed on fittings. The rear brake cable bridge in the photo is an example. Various fittings for pannier attachments were handmade to match the panniers. If we could not find a suitable fitting we simply designed and made one or more by hand.

Some Key Frames in Design Evolution

A lot of work was completed in conjunction with the Hemel Hempstead Cycle Club and Warwick Dalton who rode both the Tour de France and The Worlds pursuit championship, in which if I remember correctly he was a medallist.
Warwick, Mike Shea, and Bob Addy were all over six feet tall in contrast Mick Brown and Alan Perkins were around five seven. The lug extensions were as a result of the need to stiffen up the big frames as the steeper angles exerted greater pressure at key points. The smaller frames had 75-degree seat angles to give the shorter riders a more efficient position.

My own frame built around 1961 is numbered 28034 if this helps give a fix on dates

1964 I joined Television Audience Measurement. I continued to work part time on specials until 1966/7.
*************************** End Quote ****************************************

Holdsworths are essentially numbered in sequence....
When Reg started doing the specials in 1958 the Factory issued the shop with a batch of frame numbers to use. How many were in each batch, how many batches were issued etc is not yet known, but at mid 1958 Holdsworthy would be at about #24000. So up until the shop started its own numbering system in 1965, we get shop builds with factory numbers, but these numbers will drift out of synch with the ones being applied by the factory (as much higher production levels)

One special build, said to be a copy of Anquetils (1959? from memory) TdF bike has surfaced, serial given is 25775 but first 2 digits are uncertain (damn), the owner says this was made late 1959 or early 1960. Memory drifts terribly, so we have to treat this data with caution.

Holdsworth Monsoon (factory) #26019 was bought 23 Dec 1959 (have copy of invoice) but we do not know how long it lay in stock. We expect c1500 Holdsworths per year, Freddie Grubbs* were numbered on a different system, Claud Butlers* are yet unclear 1959-64. Monsoon 26768 is said to have been bought late 1959, and was definitely used on a tour in summer 1960. I suspect it was bought early 1960. If Holdworths were at c26400 on 1 Jan 1960 we expect c 27,900 on 1 Jan 1961 so the 28,000’s should appear in 1961.

27988 Monsoon bought Spring? 1961
Reg Collard built his own frame around 1961 is numbered 28034. So this is a shop issued batch (of numbers).
Your own Italia is 28259 looks like it may be from the same batch
28425 Monsoon est 1960-61 by Hilary Stone (Cycling Plus 1995)

You see, we have 2 certain shop models sandwiched by 2 certain factory jobs (assuming Hilary ID’d the Monsoon right, trivial). It looks possible that the factory batch here is 28000 to 28300 But Reg was only producing c 2-3/wk, say 125 PA, so that’s about 2 years worth.

Around 1962 or 63 the factory restarted their serials. Indeed the highest number that I have gathered in the first system is the above Monsoon 28425. A 3 digit job 604 has surfaced, owner est c1963. It all gets a bit complex, but 1688 is a shop issue Italia, probably 1964.

Your Italia has Prugnat Type I lugs, fully sloping Prugnat crown.

We know Reg built it (not Tommy Quick [TCQ] or Charlie Roberts who probably started 1964 and did stock Italias) because of the big BB lug extensions, it is like a Reg trade mark. The big thick hollow seatstay wrapovers, Reg mentions above, have not started even in early 1965, so nor the allen key seatbolt. So this is a rare Italia, because it was made by Reg, it is a special build, later Italias were made for stock and so would not be made by Reg. TCQ, CR or Alec Bird would do them and maybe elsewhere. Stock serials have a K added at the end.

We know Holdsworthy went all Italian in 1963.
The Mistral appears with Prugnat I type lugs. The Grubb range goes all Italian too (see page on site). I know its complex, and this is just a small bit of it, but all taken together, its got to be a late 1963, possibly early 1964 shop Italia by Reg Collard. This will focus down in time, as more data surfaces.

The lovely wee WFH decal on the seatstay topeyes also has appeared on a Stock track frame.
Edward Albert 66118K (Shops own serial system, 66 start=1966, K= made for stock)

Norman Kilgariff (13/7/2004)

* Both the Freddy Grubb and Claud Butler brands were owned by Holdsworth at this time. DB

The Frejus is gone...

and as I write, Mark Battley is explaining to his wife how their lives will be enriched by the greasy 50-year old bicycle he has brought home.

FOR SALE 1956 Frejus Tour De France $240

An ill-advised Trademe purchase from earlier in the year, which I would like to quit for what it owes me.
This bike could be made into a clean, useable thing with a couple of days work, or restored to original condition.

As is typical with older Italian bikes, the paint is in good nick for it's age, but the chrome is peeling everywhere. If you want to retain the original finish you can keep the rust at bay with occasional applications of WD40 or similar.
The Dunlop Special Lightweight rims are also rusty, but I think they would look 100% better with a wire brushing.

More photos HERE. Double click on the image for full size.

Spec
Seat tube_____55cm centre to top
Top tube_____55cm
Headset______Frejus
Stem________GB Reynolds 531 10cm
Cranks_______Duprat with Magistroni chainrings
Brakes_______Mafac Dural Forge
Rear Derailler__Campagnolo Gran Sport (pre-1961)
Hubs
Rims________Dunlop Special Lightweight 27 x 1-1/4

EMAIL for more information, or call me on 021 2942888

Ebay relapse

Today I planned to buy a Ron Cooper frame on ebay from a guy in Texas, but ended up buying a W.B Hurlow from English collector Hilary Stone.

The Ron Cooper would have been a nice match for my Gillott, but I fumbled my last-second bid.
The Hurlow looks very similar to my 1963 Condor Italia, but with the advantage that it is my size. I maintained my bidding resolve by surfing through photos of Kevin Krugers similar '72 Hurlow on Wool Jersey.

Hilary's auction spiel:
'Offered for sale is a very original 24in ctt W B Hurlow frame from 1969. Top tube length is 22in and rear dropout width is 124mm. This beautifully built frame was built with Prugnat lugs. Bill Hurlow was one of the very top framebuilders in the UK during the 1950s to 1970s period. There are some other lovely touches - the curved chainstay bridge and reinforced seatstay bridge for example. The frame is in very sound condition though the finish has detoriated somewhat.

Bill Hurlow links:

• Vintage Lightweights UK
• Classic Rendezvous
• Kevin Kruger's '72 Hurlow Bike, with photos from Hurlow's workshop
• Kevin Kruger's Hurlow-built Condor track bike
• Bob Freitas' orange & yellow Hurlow
• John Pergolizzi's fancy lugged Hurlow
• Pergolizzi's Hurlow-built Condor, which has some interesting features.
• Pergo's S.W.Cotten is said to have been built by Hurlow too.

Some retrobike metabloggage

Over at Phil Varner's blog, scans of Cycling Weekly's reportage of the 1967 Track World Champs at Amsterdam.

Ron Baensch, disqualified at these champs for doping, was a consistent medallist in the sprints during the early sixties, and was to go onto greater notoriety for punching a commisaire at the 1970 World Champs at Leicester , England.

The report on Sercu's victory in the Pro sprint suggests that ₤250 was the going rate to buy a World Championships.

From Youtube, a couple of English film clips from the fifties, showing a CTC outing by train.

.

and a short vid of Fausto Coppi winning the Alpe d'Huez stage of the 1952 Tour de France

Toei Demontable

Not unlike my Breakaway, but in a more retro idiom: Mr Kojima's stunning Toei Demontable.
To complement the flawless Toei workmanship, the bike is subtly tricked out with such exotica as custom-made chainrings, titanium-railed Ideale Mod.90 saddle and a Campagnolo aluminium freewheel.
The rubber strap on the chainstay (left) is to protect the paint from chainslap.

For a largely meaningless but entertaining translation, cut & paste the URL into Babelfish.

The Toei is based on the French Rene Herse demountable design, shown here on Jan Heine's Vintage Bicycle Press website.
Herse Demontables featured shiftlevers on the seattube, so that only the back brake cable must to be disconnected for disassembly.
Mr Kojima's bike has conventional downtube shiftlevers, so presumably the derailler cables must also be disconnected before the bike can be disassembled.

San Francisco

On the way home from Italy, I stopped for two days in San Francisco.

SF has a diverse, vibrant bike culture that makes it a great town for bikeshop crawling.
My flight got in at midday, allowing time for raid via Bay Area Rapid Transit on Jitensha Studio in Berkeley, where I bought a couple of tee shirts to avert a laundry crisis, and a handful of Honjo mudguard fittings for a carbon-fibre fender project.
The Berkeley BART station has a Bike Station providing secure bike parking and bike repairs for commuters.

Last Friday of the month is Critical Mass night, which I remembered too late to join in, but the Mass went past my hotel, noisy, good natured, and taking several minutes to go by.

Saturday morning saw me back on BART, heading for Walnut Creek and the World Headquarters of Rivendell Bicycle Works. I took the Breakaway, planning to go for a ride up Mount Diablo or perhaps head for Sausalito in the PM, but ended up taking one of Rivendell's Rambouillet demo bikes a short way up Diablo instead.
Its a dangerous place to take your credit card, and so I departed with a couple of wool jerseys, a a pair of Nitto Noodle Bars for the Ritchey, and a few other essential widgets.

Sunday morning I caught the MUNI bus up Haight St, which was still in Kris Kristofferson mode, headed for the bike shops on Stanyan St.
There seem to be few less shops there than when I first visited in 1990. It was always a cheap thrill to venture into Velo-City to get your fair share of abuse from owner Holland Jones, who once lambasted me for my 'colonial' accent.

Fortunately, American Cyclery is still there, with its mix of old, and new-but-interesting.

Once I had exhausted the delights of Stanyan St, I hopped back on the MUNI bus for a few blocks, then embarked on a death march along Steiner St in search of City Cycle, who cater to the Very Big Wanker demographic. Despite being in loose control of two still-functional credit cards I managed to walk away without a new Serotta or seven.